X2 Volt Sensor
The X2 Volt sensor is used for measuring voltage from the output voltage test points on X-ray machines. The voltage corresponds to a kV or mA/mAs. With its intuitive interface and automatic capture of waveforms, it becomes easier than ever to perform these measurements using the X2 Volt sensor compared to an oscilloscope that requires many settings and manual adjustments. For faster data analysis, built-in conversion factors can be selected in the base unit to calculate and display the corresponding kV or mA/mAs.
The X2 Volt sensor can also be used for connecting other measurement devices providing a voltage signal between ± 16 V, such as a mAs clamp for non-invasive mAs measurements.
Documents & Downloads
Datasheets and Specifications
Certificates and Declarations
Videos & Webinars
Learn step-by-step how to use the RaySafe X2 Volt sensor to calculate mA/mAs or kV from low voltage test points on an X-ray machine.
The Volt sensor is used for measuring voltage from the output voltage test points on X-ray machines.
The RaySafe X2 Volt sensor is used for measuring on X-ray machine test points. The voltage corresponds to a kV or mA/mAs. Measurements are easier than ever, due to its intuitive interface, automatic capture of waveforms, and no need to make any settings or manual adjustments,