Comprehensive solutions for the X-ray room
Setting up the RaySafe X2 System
Video guide on how to set up the RaySafe X2 system and start measuring on X-ray equipment. Subtitles in several languages.
Mammographic Applications Including Scanning Tomosynthesis with the X2
The RaySafe X2 MAM sensor has state-of-the-art precision in dose and HVL. It enables important readings without any pre-knowledge of the mammography machine. Connect the sensor and immediately measure without any selection of beam quality.
Perform Leakage and Scatter Measurements with the X2 Survey Sensor
The RaySafe X2 Survey sensor is primarily used to perform leakage and scatter measurements in diagnostic X-ray applications. Unlike a pressurized ion-chamber, the small silicon-based sensor can be shipped without any special considerations.
Dose Measurements Used to Calculate CTDI with the X2 CT Sensor
The RaySafe X2 CT sensor fits directly into a head and body phantom or can easily be positioned free-in-air with the X2 Flexi stand. There is no need for fragile and noisy analog cables, manual temperature or pressure corrections.
RaySafe X2 mAs Measurements
Video guide on how to measure mA/mAs with RaySafe X2. Subtitles in English.
Measure Voltage with the New X2 Volt Sensor
The RaySafe X2 Volt sensor is used for measuring on X-ray machine test points. The voltage corresponds to a kV or mA/mAs. Measurements are easier than ever, due to its intuitive interface, automatic capture of waveforms, and no need to make any settings or manual adjustments,
RaySafe X2 on Dental Panoramic Machines
Video guide on how to position a DENT or R/F sensor on a panoramic dental X-ray machine. Subtitles in English.
RaySafe X2 View Basics
Video guide on the basics of the RaySafe X2 View software. Subtitles in several languages.
Using the Flexi Stand
Video guide on how to set up the flexi stand to use with the RaySafe X2 system. Subtitles in several languages.
RaySafe X2 View to Excel
Video guide on how to use RaySafe X2 View to send data to excel while doing measurements with the RaySafe X2. Subtitles in several languages.
How to Update Your RaySafe X2 Base Unit
Learn step-by-step how to update your RaySafe X2 base unit using RaySafe View software.
How to Measure with the RaySafe X2 CT Sensor
Video guide on how to measure with the RaySafe X2 CT sensor. Subtitles in several languages.
Introducing the X2 Volt Sensor
The Volt sensor is used for measuring voltage from the output voltage test points on X-ray machines.
How to Measure with the RaySafe X2 MAM Sensor
Video guide on how to measure with the RaySafe X2 MAM sensor. Subtitles in several languages.
How to Measure with the X2 Volt Sensor
Learn step-by-step how to use the RaySafe X2 Volt sensor to calculate mA/mAs or kV from low voltage test points on an X-ray machine.
How to Measure with the RaySafe X2 R/F Sensor
Video guide on how to measure with the RaySafe X2 R/F sensor. Subtitles in English.
Luminance and Illuminance Measurements with the X2 Light Sensor
The X2 Light sensor has an ergonomic design in durable aluminum, which allows for both manual measurements as well as easy mounting for automatic measurements.
Navigating the RaySafe X2 Base Unit
Video guide on how to navigate the RaySafe X2 base unit. Subtitles in several languages.
Measure all Radiological Parameters with the RaySafe X2 R/F sensor
The RaySafe X2 R/F sensor can be used on all R/F applications without the need to select ranges or modes. It measures dose, dose rate, kVp, HVL, total filtration, exposure time, pulses, pulse rate and dose/pulse – in one exposure.